Introduction 🔊 Read Aloud

Hello and welcome to your SpeCiC AI Smart Glasses. This is the official accessible user manual designed exclusively for visually impaired users, based directly on the original English instruction manual. I will guide you step-by-step through finding all buttons by touch and mastering every function of your glasses.

Please hold the glasses in your hands now, with the temple arms facing you and the frame pointing forward. Follow my instructions slowly and carefully.

Precise Button and Component Locations 🔊 Read Aloud

This is the most important section. Please take 1-2 minutes to feel and confirm each location with your fingers.

Right Temple Arm (Above Your Right Ear)

This is the only side with physical buttons and where all core operations are performed. Run your right index finger along the outside of the right temple arm from front to back:

• Button A1: Located at the very front of the right temple arm, right where the frame connects to the arm. This is a slightly larger circular raised button, approximately 8mm in diameter, with a very distinct feel. This is your most frequently used button.
• Button A2: Located approximately 1.5 centimeters directly behind Button A1. This is a slightly smaller circular raised button, approximately 6mm in diameter, and sits a bit lower than Button A1.

Left Temple Arm (Above Your Left Ear)

This side has no physical buttons. The entire outer surface is a smooth touchpad. Run your left index finger along the outside of the left temple arm from front to back:

• Area B: Corresponds to the position of A1 on the right side, this is the front part of the touchpad
• Area D: Corresponds to the position of A2 on the right side, this is the back part of the touchpad
• The entire area from B to D is touch-sensitive, approximately 5 centimeters long

Under the Frame (On Both Sides of Your Nose Bridge)

Run your fingers along the bottom of the frame from underneath:

• Position E: Located at the bottom of the right frame, closest to your nose bridge. This is the camera location, which feels like a small circular indentation
• Indicator Light F: Located approximately 5 millimeters to the right of Camera E. This is a very small indicator light that will illuminate during operations. You will not see it, but you will hear corresponding audio prompts.

APP Download and Bluetooth Pairing 🔊 Read Aloud

Step 1: Download the HeyCyan APP

1. Open the app store on your phone
   • For iPhone: Open the App Store
   • For Android: Open the Google Play Store
2. Search for "HeyCyan" and find the app with the blue icon
3. Tap "Download" and install it on your phone
4. After installation is complete, open the app and register an account following the prompts

Step 2: Bluetooth Pairing

1. First, make sure Bluetooth is turned on on your phone
2. Press and hold Button A1 for 3 seconds until you hear the clear "Power on" prompt. Your glasses are now turned on.

IMPORTANT: Power on is 3 seconds, not 6 seconds! Power on is 3 seconds, not 6 seconds!

3. Open the HeyCyan APP and tap the "Connect Device" button on the home page
4. The app will automatically search for nearby Bluetooth devices. Find the device whose name starts with "SpeCiC" in the list
5. Tap on that device name and wait 3-5 seconds
6. When you hear the "Connected successfully" prompt, pairing is complete

For all future uses, the glasses will automatically connect to your phone as long as both are turned on and Bluetooth is enabled.

Detailed Basic Operations 🔊 Read Aloud

1. Power On and Off

• Power On: Press and hold Button A1 for 3 seconds. You will hear "Power on" when successful.
• Power Off: Press and hold Button A1 for 6-8 seconds. You will hear "Power off" when successful.
• Emergency Power On: If the glasses turn off automatically due to low battery, they will turn on automatically as soon as you connect the charger.

2. Left Touchpad Operations

The entire left temple arm is a touchpad. You can operate it with one finger:

• Play/Pause Music: Double-tap anywhere on the touchpad. You will hear a "ding" sound to confirm the operation.
• Increase Volume: Slide your finger forward on the touchpad (from Area D to Area B, toward the frame)
• Decrease Volume: Slide your finger backward on the touchpad (from Area B to Area D, toward your ear)
• Skip to Next Song: Press and hold anywhere on the touchpad for 1 second
• Go to Previous Song: Quickly triple-tap anywhere on the touchpad

3. Take a Photo

• Operation: Short press Button A1 once
• You will hear a clear camera shutter sound, indicating the photo was taken successfully
• Photos are automatically saved to the glasses' internal memory

4. Record Voice

• Start Recording: Press and hold Button A2. You will hear "Recording started".
• During recording, you can speak normally and the glasses will capture all sound
• Stop Recording: Short press Button A2 once. You will hear "Recording saved".

5. Record Video

• Start Video Recording: Quickly double-tap Button A1. You will hear "Video recording started".
• During recording, the glasses will continuously capture both video and audio
• Stop Video Recording: Short press Button A1 once. You will hear "Video saved".

6. Phone Calls

When you receive an incoming call on your phone, you will hear the ringtone through the glasses:

• Answer Call: Short press Button A1 once
• End Call: During a call, short press Button A1 once
• Reject Call: When the phone is ringing, press and hold Button A1 for 2 seconds. You will hear "Call rejected".

7. Factory Reset

• Operation: Press and hold Button A1 for 11-13 seconds
• You will first hear the "Power off" prompt. DO NOT RELEASE YOUR FINGER. Keep holding.
• Continue holding until you hear "Factory reset completed", then release your finger
• The glasses will automatically restart, and all settings will be restored to their original factory state

8. Wear Detection Feature

This feature is enabled by default and is very useful:

• When you take off the glasses, any music that is playing will automatically pause
• When you put the glasses back on, double-tap the left touchpad to resume playback

WIFI Function 🔊 Read Aloud

When connected to WIFI, the glasses can automatically sync your photos, videos, and recordings to your phone. They can also use AI and translation functions independently without a constant Bluetooth connection to your phone.

1. Make sure your phone is already connected to your home WIFI network
2. Open the HeyCyan APP and tap the "My Device" option at the bottom
3. Tap on the name of your connected glasses
4. Find and tap the "WiFi Settings" option
5. Select the name of the WIFI network you want to connect to from the list
6. Enter the WIFI password and tap "Connect"
7. Wait 3-5 seconds. When you hear "WiFi connected", the connection is successful

Once connected, all photos, videos, and recordings you take will be automatically imported to your phone's album via WIFI.

Charging Instructions 🔊 Read Aloud

• The charging port is located at the very end of the right temple arm (the end that goes behind your ear)
• Insert the Type-C end of the included charging cable into this port
• Plug the other end of the charging cable into a power adapter, then into a wall outlet
• When charging begins, you will hear "Charging started"
• During charging, the indicator light is red
• When fully charged, you will hear "Charging completed", and the indicator light will turn blue
• A full charge takes approximately 1.5 hours and provides up to 12 hours of continuous use

AI Voice Assistant Instructions 🔊 Read Aloud

This is the core feature designed specifically for visually impaired users. It can act as your "eyes" to help you identify everything around you.

1. Wake Up the AI Assistant

There are two ways to wake up the assistant. Choose the one you prefer:

• Voice Wake Up: Simply say clearly "Hey Cyan". You will hear a "ding" sound when the assistant is ready.
• Button Wake Up: Short press Button A2 once. You will hear the prompt sound and can then speak.

2. Using Core Features

(1) Object Recognition (Most Useful Feature)

This feature helps you identify objects you are holding, things in front of you, text, and much more.

• Method 1: After waking up the AI assistant, say clearly "What is in front of me?"
• Method 2: Quickly double-tap Button A2. This is a shortcut to start object recognition immediately, no need to wake up first.
• The glasses will take a photo and then tell you the result through voice.

You can use this to identify:

• Medicine boxes and instruction leaflets
• Food packaging and expiration dates
• Clothing colors and styles
• Various household items
• Plants and animals
• Street signs and markers

(2) Conversation Feature

After waking up the AI assistant, you can ask any question, such as:

• "What time is it now?"
• "What is the weather today?"
• "Set an alarm for 7 o'clock tomorrow morning"
• "How much is 2 plus 3?"

The AI will answer your question directly through voice.

(3) Voice-Controlled Photography

After waking up the AI assistant, say "Take a photo". The glasses will automatically take a photo and save it.

Translation Feature 🔊 Read Aloud

The glasses support real-time translation in over 100 languages, making them an excellent companion for travel and communication.

1. Wake up the AI voice assistant
2. Say clearly "AI translation"
3. After hearing the prompt "Please say what you want to translate"
4. Speak the sentence you want to translate directly, for example: "Hello, nice to meet you"
5. The glasses will automatically translate it into the target language and play it back through the speakers

You can set your preferred translation language pair in the "Translation Settings" section of the HeyCyan APP.

Troubleshooting and Safety Notes 🔊 Read Aloud

1. What if the glasses are not responding?

• First check if they have power. Connect the charger and wait 10 minutes before trying again.
• If still not responding, press and hold Button A1 for 15 seconds to force a restart.

2. What if Bluetooth won't connect?

• Make sure Bluetooth is turned on on your phone
• Make sure the glasses are turned on
• Turn off Bluetooth on your phone, wait 10 seconds, then turn it back on
• If still not working, restart both the glasses and your phone

3. Important Safety Notes

• Do not use the glasses while they are charging
• Do not expose the glasses to extreme heat or moisture
• Do not touch the camera or indicator lights with sharp objects

Conclusion 🔊 Read Aloud

This completes the official accessible user manual for your SpeCiC AI Smart Glasses for visually impaired users. If you encounter any problems during use, please feel free to call our customer service hotline or contact online support through the HeyCyan APP.

We hope these glasses become a valuable companion in your daily life, making it more convenient and independent. Thank you for reading!